Kverneland Enduro Pro

The frame is a result of a long study made by FEM (Finite Element Method) calculation to optimise the steel over the working width and proposing a strong structure suitable for tractors up to 350hp.

The complete Enduro/Enduro Pro range has been designed to be combined with the heaviest rollers in the range. All the most aggressive scenarios (deep working when turning, headland turns, transport tests, …) have been considered to make the different frames as strong as possible and thus guaranteeing the proven Kverneland quality.

For stony conditions and high Penetration – Triflex 700 & Shear-bolt Tines

The Triflex tine uses Kverneland’s leaf spring system for 700 kg point pressure and smooth release when hitting obstacles. A shear-bolt version is also available. Both hollow, heat-treated tines have a narrow design with two working zones, reducing pull while ensuring perfect penetration, ideal for deep loosening and stony, heavy soils.

The Triflex 700 and shear-bolt tines can fit different shares for varying depths and tasks. Seven share designs use the Knock-on® system, allowing fast, tool-free changes for the next job or worn parts.

Features: 700 kg release, 27 cm release height, constant cutting depth, intensive mixing, full share range.

Kverneland offers levelling tools for Enduro and Enduro Pro to create a fine seedbed. On the Enduro Pro, the parallelogram keeps levelling equipment at the optimal depth when the roller changes position.

Levelling tines work well for light to medium soils with normal straw, while discs suit heavy residues and clay or loam soils. Both have spring or rubber overload protection and individual release for stony conditions. Angles are adjustable, and centralized handles simplify overall adjustment.

Hydraulic or mechanical folding keeps transport width within 3.00–3.50 m. A rear triple finger harrow levels the soil and controls weeds, adjustable via angle and hydraulic pressure.

User comfort is key – easy adjustment

Kverneland always focuses on safe operation and user comfort. With all the adjustments being done without the need for tools, a lot of precious time is saved!

Adjusting the Enduro and Enduro Pro is easily done. When setting the working depth of the tines, the parallelogram design allows the correct depth of the levelling discs to be maintained without adjustment in most conditions.

In addition, there is hardly any maintenance to be done apart from changing wearing parts.

The Enduro can simply be connected/disconnected from the tractor due to the easy hitch linkage. And this is even more comfortable with the hydraulic depth adjustment.

The roller on a cultivator is an elementary tool with different tasks:

1. Consolidation of the soil structure for a weatherproof finish
2. Cutting and breakdown of large fissures during the wetting and drying process
3. Finalising the levelling and helping retain valuable moisture
4. Supporting the depth control

The choice of the right roller depends on the soil type, soil condition, crop rotation and lifting capacity of the tractor. View your options below.

A rear triple finger harrow (Enduro Pro and Turbo) provides levelling and controls weed development by pulling the weeds out of the ground so that the roots dry out in the sun.

This is particularly interesting with rhizome and other weeds that could start growing again if they are pressed by a packer immediately after cultivation. Gauge wheels control the working depth of the machine.

The triple finger harrow can be adjusted by the setting angle and the hydraulic pressure via the parallelogram according to conditions.